Where can I find this command?
DeleteMeshFaces 指令可從網格刪除選取的網格面產生網格洞，以便修復、封閉網格，讓網格可以輸出快速原型 ( Rapid Prototyping )。
附註：此指令在著色模式下比較方便使用，因為在著色模式下可以直接選取網格面，在框架模式下必需選取網格邊緣。
步驟
| 4 | 選取網格面。 |
Notes
| ● | Some STL/SLA printers have problems if meshes contain many long, thin facets. These can slow the printer's slicing process down, produce odd printed results, and run the printer out of memory. |
| ● | The MeshRepair command may be useful when tuning up meshes for STL/SLA printing. |
請參考
