CollapseMeshVertex 指令可將選取的網格頂點合併至相鄰的網格頂點。
網格頂點
頂點是網格面邊緣的匯集點,網格頂點包含 X、Y、Z 座標,也可能包含法線向量、色彩值及貼圖座標。
步驟
4 | 選取一個網格頂點。 周圍的網格面與邊緣會做相對應的調整。 |
Notes
● | Some STL/SLA printers have problems if meshes contain many long, thin facets. These can slow the printer's slicing process down, produce odd printed results, and run the printer out of memory. |
● | The MeshRepair command may be useful when tuning up meshes for STL/SLA printing. |
請參考