FilletSrfCrv

Toolbar

Menu

Surface Fillets

New in V8

Surface

Fillet Surface and Curve

 History enabled

The FilletSrfCrv command creates a fillet surface between a surface and a curve.

Steps

  1. Select a surface.

    The picking location decides the side to create the surface.

  2. Select a curve near the surface.

Command-line options

Radius

Sets the radius of the fillet surface. It will be the initial value of the Radius slider in the options dialog

Options

Radius

Move the slider to change the radius, or double-click on the slider to enter a value.

Range

Click a number button to change the range of the slider for smaller or larger adjustment.

Blend Type
Arc

The sections of the fillet surface are arcs.

Deformable

Adds more control points to the fillet sections for adjusting tangency and bulge.

Deformable degree

Sets the degree of fillet sections from 3 to 5.

Tangent

Moves the second points on both ends in the tangent direction.

Bulge (For degree 4 and 5)

Moves the point(s) in the middle to make the fillet sections sharper or flatter.

G2 Blend

Creates a surface connecting to the input surface with curvature continuity.

Trim

Uses the output surface to trim the input surface when possible.

History is supported when the Trim checkbox is disabled.

See also

FilletSrf

Create a constant-radius round surface between two surfaces.

FilletSrfToRail

Creates a surface blending between a surface and a curve referencing the curvature of another surface.

 

FilletSrfToRail

Toolbar

Menu

Surface Fillets

New in V8

Surface

Variable Fillet/Blend/Chamfer >

Fillet Surfaces To Rail

 History enabled

The FilletSrfToRail command creates a surface blending between a surface and a curve referencing the curvature of another surface.

Steps

  1. Select a curve.

  2. Select the surface near the curve.

  3. Select another surface.

Options

Blend Type
Arc

The sections of the fillet surface are arcs.

Deformable

Adds more control points to the fillet sections for adjusting tangency and bulge.

Deformable degree

Sets the degree of fillet sections from 3 to 5.

Tangent

Moves the second points on both ends in the tangent direction.

Bulge (For degree 4 and 5)

Moves the point(s) in the middle to make the fillet sections sharper or flatter.

G2 Blend

Creates a surface connecting to the input surface with curvature continuity.

Trim

Uses the output surface to trim the input surface when possible.

History is supported when the Trim checkbox is disabled.

See Also

FilletSrf

Create a constant-radius round surface between two surfaces.

FilletSrfCrv

Creates a fillet surface between a surface and a curve.

 

 

 

Rhinoceros 8 © 2010-2024 Robert McNeel & Associates. 28-Feb-2024