Join

Toolbar	Menu	Shortcut
Curve Drawing Geometry Fix Main Main1 Popup Solids Sidebar STL Tools Surface Sidebar	Edit Join	Command ⌘ + J

Toolbar

Shortcut

Edit

Join

The Join command connects objects together to form a single object.

Join turns lines into polylines, curves into polycurves, surfaces and polysurfaces into polysurfaces or solids.

Join does not change the surfaces. It is merely a test to see if the surfaces edges are within 2x tolerance. If they are, then they are tagged as joined and not available for further joining.
When a curve is selected first or using sub-object selection, surface edges or mesh edges can be joined with the curve to create a polyline or polycurve.
You can join curves that touch end-to-end.
The order the objects are selected determines the layer of the new joined object.
You can join surfaces and polysurfaces that touch at naked edges.
You can join meshes that do not touch (disjoint meshes).
Joining does not change the underlying surface geometry. It simply "glues" adjacent objects together so meshing, Boolean operations, and intersections can cross seams without gaps.
To change a surface's geometry so it fills in a gap, use MatchSrf or fill the gap with a new surface created by FilletSrf, BlendSrf, BlendEdge, FilletEdge, NetworkSrf, or Patch.
To change two adjacent surfaces into a single surface, use MergeSrf. Pay special attention to the setting of the Smooth option to get the geometry you want.

Select the objects (curves, surfaces, polysurfaces, or meshes) to join.
Use SelChain to select a string of curves that touch end to end.

Select an object (curve, surface, polysurface, or mesh).
Select the next object.
To select a surface edge as a curve to join, see sub-object selection.
When you are finished selecting objects to join, press Enter.

Command-line options
Undo	The Undo option removes the last selected object from the join operation.
JoinDisjointMeshes	The JoinDisjointMeshes option allows joining meshes that do not touch into one object. See: SplitDisjointMesh command.
SubCrv	Type subcrv to select part of a curve as input.

Command-line options

Undo

The Undo option removes the last selected object from the join operation.

JoinDisjointMeshes

The JoinDisjointMeshes option allows joining meshes that do not touch into one object.

Type subcrv to select part of a curve as input.

See also