檔案
Properties >
Annotation Styles
| Toolbar | 功能表 |
|---|---|
|
|
檔案 Properties >
Annotation Styles
|
註解內容可管理模型的文字、尺寸標註、標註引線的設定。
Marks the current style. Click the button to set a different style to be current.
Lists the annotation styles defined in the model.
Creates a new annotation style.
雙擊尺寸標註型式名稱可重新命名。
Changes the properties of the selected style to match a different style.
Imports annotation styles from .3dm files into the current document.
Opens the Annotation Styles definition page for the selected style.
Deletes the selected style.
When checked, annotations are adjusted by the Model space scale value on the Annotation Style.
This is important for opening models that were created in Rhino 4 or older, or in Rhino 5 with the Enable Annotations Scale setting turned off, or when importing from CAD applications.
When checked, annotations are adjusted to full size, 1=1 height on the layout.
For example, if the Height in the annotation style is .125 and the model scale is 10, the height of .125 is displayed on the layout.
This makes annotations in details of different scales print at the same height.
When the Enable scaling options are NOT checked, no scaling is applied to model space or layout space annotations.
The Annotation Styles properties manage the default annotation style for the current model.
註解型式的名稱。
顯示文字縮放後的高度。
設定所有註解元件縮放比的大小。
The annotation font. Italic and underline styles must be set as individual properties.
Sets the font style to bold.
文字的高度 (模型單位)。
標註文字與標註線之間的距離，這個設定同時也是標註文字遮罩邊界的寬度。
Masks in dimensions are half the size of text masks that use the same value.
文字從背面檢視時仍面向使用者
原來的文字 (左)，面向使用者 (中間)，背對使用者 (右)。
文字保持跟螢幕一致。
關閉正對視圖(左側)，開啟正對視圖(右側)。
Settings determine how linear dimension text is displayed.
Text is always flat to the screen.
Horizontal to view off (left), Horizontal to view on (right).
在標註線上切出一個置中的缺口放置標註文字。
標註文字放置於標註線之上與標註線對齊。
Draws the text aligned with the dimension line.
Draws the text horizontal, regardless of the direction of the dimension line.
Settings determine how radial dimension text is displayed.
Text is always flat to the screen.
在標註線上切出一個置中的缺口放置標註文字。
標註文字放置於標註線之上與標註線對齊。
Draws the text horizontal, regardless of the direction of the dimension line.
Draws the text aligned with the dimension line.
標註線突出於延伸線的長度 (通常於斜標配合使用)。
Extension line extension (1), Extension line offset (2).
延伸線突出於標註線的長度。
延伸線起點與物件標註點之間的距離。
Specifies an extension length for all dimensions.
Turns off display of the first extension line. This depends on the direction the dimension was drawn.
Turns off display of the second extension line. This depends on the direction the dimension was drawn.
The distance between dimension lines when baseline dimensions are used.
Sets the style of the centermark for radius and diameter dimensions
No centermark is drawn.
A cross mark is drawn at the center of the radius or diameter.
A cross mark and lines that extend to just beyond the edges of the object.
箭頭
圓點
斜線
短箭頭
V 型箭頭
矩形
細箭頭
超細箭頭使用自行建立的圖塊做為箭頭。
箭頭圖塊的基準點決定箭頭在標註線或標註引線端點的位置。在下面的圖片裡：
(1) 箭頭圖塊的基準點放置於箭頭尖端時，標註線會穿過箭頭。
(2) 箭頭圖塊的基準點放置於箭頭尾端時，標註線不會穿過箭頭。
如果您想要箭頭的尖端出現在準確的位置，請將箭頭圖塊的基準點放置於箭頭的尖端。
不顯示箭頭。
箭頭從頂端至末端的長度。
Units used by linear dimensions.
轉換 Rhino 單位和尺寸標註單位的縮放比。
1.25
1-1/4
距離標註顯示的小數位數。
Round off the dimension to the nearest listed value.
附加於標註文字之前的文字。
附加於標註文字之後的文字。
Turn off the display of zeros at the beginning or end of the dimension.
See: Math Planet
Decimal degrees. A measurement of a plane angle, defined so that a full rotation is 360 degrees.
度/分/秒
A unit of angle, equal to an angle at the center of a circle whose arc is equal in length to the radius.
角度標註顯示的小數位數。
Round off the dimension to the nearest listed value.
Turn off the display of zeros at the beginning or end of the dimension.
箭頭圓點斜線短箭頭V 型箭頭矩形細箭頭超細箭頭使用自行建立的圖塊做為箭頭。
箭頭圖塊的基準點決定箭頭在標註線或標註引線端點的位置。在下面的圖片裡：
(1) 箭頭圖塊的基準點放置於箭頭尖端時，標註線會穿過箭頭。
(2) 箭頭圖塊的基準點放置於箭頭尾端時，標註線不會穿過箭頭。
如果您想要箭頭的尖端出現在準確的位置，請將箭頭圖塊的基準點放置於箭頭的尖端。
不顯示箭頭。
箭頭從頂端至末端的長度。
設定標註引線的曲線類型。
只有箭頭跟文字。
一個多重直線的線段。
用於標註引線的控制點曲線。
在標註引線與文字之間增加一條短的水平線。
關閉尾線(1)；開啟尾線(2)。
文字與工作平面 X 軸平行。
文字對齊標註引線。
Appends tolerance to dimension text. The tolerance is the amount that a dimensioned distance can vary.
The tolerance displays the degree of accuracy required to manufacture a certain feature or part.
設定公差數值的顯示方式。
不加入公差。
加入有正負號 (±) 的單一公差值。
加入正公差值 (+) 與負公差值 (-)。
Displays the dimension length plus the Upper value and the dimension length minus the Lower value.
Specifies the number of decimal places for the tolerance value.
Specifies the maximum or upper tolerance value.
Spedifies the minimum or lower tolerance value.
Specifies the relative text height for the tolerance values.
The SetCurrentAnnotationStyle command specifies the current annotation style.
| 工具列 | 功能表 |
|---|---|
|
|
|
The DupAnnotationStyle command creates new a annotation style by copying an existing style.
複製註解型式
From the list of annotation styles that exist in the model, select a style to use as a template.
Specify the name for the new style.
Makes the new annotation style the current style.
| 工具列 | 功能表 |
|---|---|
|
|
檔案 > 從檔案匯入 > 從 3DM 檔案匯入註解型式 |
The ImportAnnotationStyles command imports annotation styles from .3dm files into the current document.
Rhinoceros 6 © 2010-2017 Robert McNeel & Associates. 10-一月-2018
靠左 
水平置中
靠右
靠上
垂直置中
靠下
