Slab

Toolbar Menu

Extrude Solid

Solid

Slab

 History enabled

 Extrusions enabled

The Slab command offsets a curve, extrudes and caps the result to create a solid.

Steps

  1. Select a curve.
    The Slab command uses the construction plane in the view where you pick the offset as the ground plane. The Slab command offsets the curve to create a base for the slab and then extrudes the base to make a solid with mitered corners.
  2. Pick a side to offset.
  3. Pick a distance.
  4. Pick the height.
Command-line options

Distance

Sets the offset distance.

Loose

The Corner and Tolerance options are not shown and do not affect the output. Polycurves are offset as a group of separate curve segments, and there is no corner trimming or filling.

ThroughPoint

Offsets through a picked point instead of at a distance.

BothSides

Draws the object on both sides of the start point, creating the object twice as long as you indicate.


The BothSides option demonstrated with the Line command.

InCPlane

The curve is offset in the plane of the original curve. This option offsets the curve in the plane of the current construction plane instead.

See also

Create solid objects

 

 

 

Rhinoceros 6 © 2010-2020 Robert McNeel & Associates. 11-Nov-2020