Orient3Pt

Toolbar Menu

Transform

Transform

Orient >

3 Points

The Orient3Pt command moves or copies and rotates objects using three reference and three target points.

Steps

  1. Select the objects.
  2. Pick the first reference point.
  3. Pick the second reference point.
    This defines a base direction from the first reference point.
  4. Pick the third reference point.
  5. Pick the first target point.
    This corresponds to the first reference point.
  6. Pick the second target point.
    This corresponds to the second reference point.
  7. Pick the third target point.
    This corresponds to the third reference point.
Command-line options

Copy

Specifies whether or not the objects are copied. A plus sign appears at the cursor when copy mode is on. The RememberCopyOptions command determines whether the selected option is used as the default.

Scale

Re-sizes the object as it is oriented. The scale factor is based on the ratio between the distance between the first two reference points and the first two target points. The third target point is used for orientation only.

See also

Orient

Transform objects using two reference and two target points.

OrientCrvToEdge

Copy and align a curve to a surface edge.

OrientOnCrv

Transform objects along a curve normal.

OrientOnSrf

Transform objects normal to a surface.

Transform objects

 

 

 

Rhinoceros 6 © 2010-2019 Robert McNeel & Associates. 19-Aug-2019