Toolbars can be opened as a free-standing group or added to the current group.
To open a toolbar as a free-standing group
|1.|| Click the Options icon in any toolbar group.
|2.||On the menu, click Show Toolbar, and then select the toolbar name from the list.|
To open a toolbar as a new tab in the current group
|1.|| Click the Options icon in the toolbar group where you want to add the new tab.
|2.||On the menu, click Show or Hide Tabs, and then select the toolbar name from the list.|
Validate digitizer measurements against a model.
Connect and initialize a digitizing arm.
Disconnect the digitizing arm.
Draw a line normal to a surface with a digitizing arm.
Suspend/pause input from the digitizing arm.
Set a scale factor for digitized points.
Create planar cross sections with a digitizing arm.
Sketch a curve with a digitizing arm.
Pick a location with a digitizing arm.
Fit a curve through picked locations.
Fit a curve through locations on a surface.
Draw multiple point objects.
Pick a location for the viewport target.
Pick a location for the viewport camera and target.
Rhinoceros 5 © 2010-2015 Robert McNeel & Associates. 17-Sep-2015
Open topic with navigation