The RevolvedHole command creates holes in a polysurface by revolving a profile curve that defines the surface shape around an axis and subtracting the hole volume from the polysurface.
Steps
1. | Select the hole profile curve. |
2. | Pick the curve base point. The base point determines the point on the curve that will intersect with the surface and depth of the hole. |
3. | Select a target face. |
4. | Pick the location for the hole center. The revolve axis is determined by the start and end of the profile curve. |
Options
Flip
Reverses the direction.
Undo
The Undo option reverses the last action.
See also
Create and edit holes in surfaces
Rhinoceros 5 © 2010-2015 Robert McNeel & Associates. 17-Sep-2015