The Fin command extrudes a curve on a surface in the surface normal direction or tangent to the surface.
Steps
1. | Select a curve on the surface. |
2. | Select the surface. |
3. | Pick a location on the curve for a height. |
4. | Pick location to set another height, or press Enter if the surface should be uniform in height. |
Command-line options
SetBasePoint
Specify a location that serves as the first point when picking two points that set the extrusion distance.
Direction
Normal
Creates the surface in the surface normal direction.
Tangent
Creates the surface tangent to the surface.
See also
Rhinoceros 5 © 2010-2015 Robert McNeel & Associates. 17-Sep-2015